Contact Us

Industry News

Company News

Picture Name
Precautions for ironing machine

Precautions for ironing machine

1. When adjusting the speed of the ironing machine by using the speed regulating motor and the frequency converter control knob, it should be adjusted slowly and evenly, and avoid sharp rise and fall to ensure its service life. 2. As the ironing machine is a high-temperature equipment, after its work is finished, the ironing machine should be operated at low speed until the drum is fully cooled under the condition of turning off the heat source, so as to shorten the service life of each guide belt due to being in a high temperature state for a long time (electric heating ironing machine is more serious). Maintenance

2024/05/13

View Details

Solution of ironing machine

The ironing machine is generally a single, two rollers (modern ironing machines may contain three rollers), which are rotated by hand or by electricity. The roller is heated by steam or electricity. After reaching a certain temperature, when the wet clothes are rolled between the two rollers, a large amount of water can be removed and the ironing effect can be achieved. It is used in the ironing process of the ironing machine for bed sheets, tablecloths, fabrics, etc. Due to the improper operation of the operator and the old equipment in the daily operation of the ironing machine, the equipment will have various faults, the following is an example analysis of several faults of the ironing machine:

2024/05/13

Working characteristics of the ironing machine

1. This machine adopts stepless speed regulation motor speed regulation or frequency conversion speed regulation, which is convenient for users to choose the appropriate ironing speed according to the needs of different fabrics and fabric thickness. 2. The transmission, steam inlet and drain system (steam heating type) of the machine are respectively placed in the cabinet on both sides, with beautiful and novel appearance, compact structure and small volume. 3. This machine adopts the method of introducing pressure steam into the drum to heat the surface of the drum so that the fabric can be dried and ironed. 4. The machine sets the corresponding speed difference between the various levels of the conveying system to make the fabric easier to tension and iron.

2024/05/13

Installation of the ironing machine

1. There are no special basic requirements for the installation of industrial ironing machines, but the machines must be placed on a relatively flat concrete floor, and the operating position and maintenance position of 1.5 meters around the front and back must be retained. 2. After the machine is installed, please level the roller with a level. 3. When installing the machine, the access of the steam inlet and drain pipes should be considered in advance. 4. The machine must be grounded during installation to avoid accidents.

2024/05/13

The distinction between single roll and double roll of ironing machine

There are single-stick ironing machines, double-roll ironing machines, and three-roll ironing machines. Fully automatic ironing machines for large laundry equipment generally use steam-heated ironing machines. Electric-heated ironing machines consume too much power, while laundry rooms are originally competitive at low prices. Laundry rooms with too high a cost cannot withstand competition. The single-stick ironing machine has a slow ironing speed and is suitable for laundry rooms in private units where the workload is not very large. The ironing machine runs smoothly, with low noise and simple operation. The conveyor belt is a special brand for high temperature resistance and anti-static.

2024/05/13

The working principle of the ironing machine

Working principle of ironing machine washing The ironing machine is driven by the motor to rotate the inner tank through the belt speed change, and it rotates forward and backward under the action of the timing controller, driving the water and clothes to move asynchronously, so that the water and clothes, fabric and fabric, fabric and inner cylinder wall, etc. Rubbing to achieve the purpose of cleaning. A three-phase asynchronous motor or a speed regulating motor (washing and dyeing machine) is used as the running power. When the power is turned on, the power indicator light is on, and the three-position switch controls inching, stopping and automatic. The inching indicator light is on at the inching position, which can realize inching to the door. When the automatic position is on, the operation indicator light is on. Select the washing time according to the washing process requirements, and the machine will automatically run. The machine has built-in overheating, overload device, timing device, forward and reverse control device. The outer cylinder door is equipped with a safety device. If the door is opened during operation, the machine will stop immediately to ensure the safety of the machine and the operator.

2024/05/13