1. There are no special basic requirements for the installation of industrial ironing machines, but the machines must be placed on a relatively flat concrete floor, and the operating position and maintenance position of 1.5 meters around the front and back must be retained.
2. After the machine is installed, please level the roller with a level.
3. When installing the machine, the access of the steam inlet and drain pipes should be considered in advance.
4. The machine must be grounded during installation to avoid accidents.
Placement requirements
It is necessary to place the large ironing machine on a hard, flat, clean ground without water and grease to ensure its good operation. If the ironing machine is installed on uneven or unclean ground, noise or vibration will be generated and extremely dominant life will be affected.
What should I do if the large-scale ironing machine encounters vibration and noise? I trust that many consumers who dominate the industrial ironing machine will always encounter vibration and noise achievements when they dominate the large-scale industrial ironing machine. In serious moments, some ironing machines will even "walk around" by themselves. It is really annoying and helpless. So how should I deal with these achievements? What are the reasons? Here are all tips for you:
Weather description: the washing equipment of large-scale ironing machine vibrates greatly during operation, especially during dehydration, the machine body trembles or shifts, and the operation noise is also very loud.
In such cases, please follow these steps to perform the search.
Search whether the ground where the ironing machine is placed is hard, flat, clean and free of water and grease. If not, please place it in a flat and clean place.
Whether the shipping bolt of the ironing machine is still connected to it, if so, it must be removed in time.
Whether the foot of the ironing machine is loose and uneven.
Whether the ironing machine is close to other equipment and resonates with each other, if so, please remove it.
Whether the clothes in the drum are placed too little to reach the minimum washing capacity, if so, a reasonable amount of clothes must be placed, and 80-90% of the nominal capacity is recommended.